equipment compatibility

英 [ɪˈkwɪpmənt kəmˌpætəˈbɪləti] 美 [ɪˈkwɪpmənt kəmˌpætəˈbɪləti]

设备互换(相容,兼容)性

计算机



双语例句

  1. Research on Central Office Equipment's Eletromagnetic Compatibility Tolerance and Testing Method in CMMB System
    CMMB系统局端设备的电磁兼容限值和试验方法研究
  2. At present the terminal manufacturers and gateway equipment are well compatibility, central control system can only guarantee the basic functions of exchange.
    纲后各厂家的末端、网闭拆备的兼容性良好,中央控造体解只能保证基本功能互通。
  3. This paper at some length deals with intelligent power transmission and distribution equipment, electromagnetic interference, electromagnetic compatibility test and standards.
    文章就智能化输配电设备,以及其对电磁干扰和电磁兼容试验与标准作了较祥尽叙述。
  4. The higher priority goal of circuit isolating is cutting off the path of noise interference by the isolated component and device to suppress the noise interference to enable electrical equipment meeting the requirements of electromagnetic compatibility.
    电路隔离的主要目的是通过隔离元器件把噪声干扰的路径切断,从而达到抑制噪声干扰的效果,使电子电气设备符合电磁兼容性的要求。
  5. By analyzing the travelling wave characteristic of the clamping surge protective devices, this paper highlights that the filter circuits are important for improving the surge withstand capability of sensitive equipment, hence meeting electromagnetic compatibility requirements.
    在对限幅型电涌保护器波特性分析的基础上,指出滤波环节对于提高设备电涌抑制能力和满足电磁兼容的重要性。
  6. Has described the method of increasing reliability about high rate and large capacity telecommunication transmission equipment from electromagnetic compatibility and thermo-management.
    从设备的电磁兼容与热设计方面具体阐述了提高高速率大容量通信传输设备可靠性的方法。
  7. With narrow room and multitudinal electronic equipment, problem of Electromagnetic Compatibility ( EMC) in vehicular communication system is serious, and there is no research on systematic EMC test and evaluation at home.
    车载通信系统车内空间狭小,上装电子设备多,电磁兼容(EMC)问题突出;系统级EMC测试与评估在国内几乎处于空白。
  8. Put forward the essential method of electronic equipment cable arrangement design, and put forward the essential method of solving electromagnetic compatibility problem by electronic equipment cable arrangement design.
    提出了电子设备电缆布线设计的基本方法,并提出了通过电缆布线设计解决电磁兼容问题的方法。
  9. If each electro mechanical system of launch vehicle has its own dependable ground measurement equipment, the equipment will be repetitive and costly, and the whole system will have poor compatibility and low reliability.
    运载火箭各电气系统各自拥有一套地面测试设备,不但造成设备重复,成本增加,而且整套系统兼容性差,可靠性低。
  10. This paper introduce familiar auto-feeding of IC Marking equipment, analysis Auto-feeding structure, principle, efficiency and type compatibility.
    介绍了IC打标设备中常见的自动上料系统,分析了自动上料系统的的结构组成、工作原理、工作效率以及品种兼容性。
  11. Recently, self bonding enamel wires are finding increased application to rationalize winding work and improve equipment reliability, and environmental compatibility.
    为了更合理的制造线圈绕组,提高设备的可靠性及改善环境,近年来,自粘性复合漆包线正在扩大其应用。
  12. The article summarized the relative factors in constructing forestry engineering equipment standard system, brought forward that the structure of forestry engineering equipment standard system must fit the requirement of quality and environment compatibility management system, provided the primary plan for constructing forestry engineering equipment standard system.
    概述了构建森林工程装备标准体系的相关因素,提出森林工程装备标准体系的构建必须适应质量&环境兼容管理体系的要求,给出了构建森林工程装备标准体系的初步构思。
  13. IGBT inverter single power source is adopted in main circuit. High frequency arc-striking equipment has good compatibility with inverter.
    喷焊主电路采用IGBT逆变单电源,高频引弧器与弧焊逆变器具有良好的兼容性。
  14. The basic concept of electromagnetic compatibility is briefly introduced in the paper, the problems of electromagnetic compatibility for automatic equipment is discussed, some kinds of techniques and management methods to control electromagnetic compatibility are discussed.
    简述了电磁兼容的基本概念,分析了自动化设备的电磁兼容问题,并对控制电磁干扰的几种技术和管理方法进行了讨论。
  15. Cable wiring design offers the method of solving the problem of shipborne equipment electromagnetic compatibility; offer the method of improving cable wiring design and cable wiring manufacture efficiency.
    通过舰载电子设备布线设计,给出了解决电子设备电磁兼容问题的方法,提高了电子设备布线设计效率和布线施工效率。
  16. Nowadays because of increasingly complex network structure and multi-vendor network equipment, network management must be made to comply with certain standards of the network to ensure normal work and compatibility between equipments.
    现今越来越复杂的网络结构,多供应商的网络设备,使得网络管理必须遵从一定的标准规范才能保证网络的正常工作与设备之间的兼容。
  17. This paper describes the importance of the Interoperability between the wireless local area network ( WLAN) Equipment, then derives how Wi-Fi Alliance solves the compatibility of different types of WLAN equipment through Wi-Fi certification, furthermore introduces procedure, methodology and projects for Wi-Fi testing.
    文章首先阐述了无线局域网设备之间可互操作的重要性,从而引出Wi-Fi联盟是如何通过Wi-Fi认证来解决WLAN设备之间的兼容性问题,进而介绍Wi-Fi测试的流程、方法和测试项目。
  18. With the increasing in the density of electronic and electrical equipment, electronic equipment or system electromagnetic compatibility requirements increasingly high.
    随着电子和电气设备的密度急剧增加,无线电频谱日益拥挤,对电子设备或系统的电磁兼容性的要求也越来越高。
  19. Secondly, studio equipment choice, how to Guarantee the system compatibility and versatility facing the complex complex equipment.
    演播室设备的选型。面对纷繁复杂的设备如何确保系统的兼容性和通用性。
  20. Rectifier device is the important equipment of the power supply system, its monitoring and controlling part has been dependent on imported product, which price is very expensive, but its expansibility and compatibility is poor, it is urgent for localization of research.
    整流设备是地铁直流牵引供电系统中的重要设备,其监测与控制部分一直依赖进口产品,价格十分昂贵,且扩展性、兼容性较差,亟需进行国产化的研究。
  21. The experiment shows that the terminal equipment has good system compatibility and fax success ratio and quality has achieved the anticipated effect.
    实验表明,本终端具有很好的系统兼容性,传真的成功率和质量达到了预期的效果。
  22. The old NC equipment of mechanical processing enterprises are often uses the traditional enclosed CNC system, there exist many disadvantages, just as compatibility is bad, difficult to expand, low precision, lower efficiency etc..
    机械加工企业中的陈旧数控设备往往都是采用传统封闭式的数控系统,存在着兼容性差、难以扩展、精度较低、效率较低等诸多缺点。
  23. At last, the specific environment condition, test equipment and test process of electromagnetic compatibility test is introduced the problems in these tests is analyzed.
    最后论文介绍了医疗设备电磁兼容性测试的具体环境、测试设备、测试流程等,并简述了分析测试过程中遇到的实际问题。
  24. To adapt the market change that the electric control equipment in textile industry tends to adopt the servo control systems, it is pressingly necessary to develop totally digital AC servo motor drives of high intelligence, favorable compatibility and perfect control function.
    为适应纺织行业电控设备伺服化的市场变化,需要开发智能程度高、兼容性好、控制功能完善的全数字交流伺服电机驱动器。
  25. In order to make the weapons equipment work as it is wished to, the design and realization of the Integrated Test System for Electromagnetic Compatibility has become very urgent.
    为了使武器装备能够在日益复杂的电磁环境中发挥应有的效能,对电磁兼容综合测试系统的研究变得非常迫切。
  26. In recent years, with the use of the technique of bus, bus become an important system interconnection equipment in big communication system including vehicular communication system, but electromagnetic compatibility issue because of the use of bus has become increasingly evident.
    近几年随着总线技术的运用,总线成为包括车载通信系统等大系统的重要的互连设备,然而总线所带来的电磁兼容问题也越来越明显。
  27. Also, because the work of electronic equipment become increasingly complex electromagnetic environment, electromagnetic compatibility of electronic products design is also a higher demand.
    同时,由于电子设备工作的电磁环境日趋复杂,对电子产品的电磁兼容性设计也提出了更高的要求。
  28. But the product must get the compulsory product certification, the terminal equipment manufacturers request better electromagnetic compatibility of the integrated circuit which are used in the system product.
    但终端产品又必须通过强制性产品认证等,这使得终端设备制造商对产品中所使用芯片的电磁兼容等性能方面提出了更高的要求。